تاسیسات و تجهیزات الکتریکی

مطالب مفید برای علاقمندان مهندسی برق، حفاظت، کنترل و ابزار دقیق

‍Control Valve Data Sheet

A sample Data Sheet of Control Valve has been presented here:

1- Tag No.:PCV-1501A

2- Service: GAS OUT

3- Fluid(Liquid, Gas, Two Phase): Gas

4- Line Size(inch): 12" 

5- Pipe Schedule: W.T. 7mm

6- Hydro and Leakage Test: V.T.A (Certification for Hydro Press. and Leakage Shall be submitted by Valve Manufacturer.

7- Calculated CV (Min/Max): V.T.A

8- Valve Opening (Min/Norm.): %20/%80

9- Body Size/Trim Size: 8"/MFR

10- Body Rating/End connection: 300

11- Body Form (Globe, Angle, Butterfly,...): Globe

12- Body Material: C.STEEL

13- Bonnet (Plain, Exten, Finned,...): PLAin

14- Stem and Plug Mat.: 316 SS

15- Plug Form (Single, Balance,...):  VTA

16- Valve Characteristic (Linear, EQ.%,...): EQ.%

17- Leakage Class: VTA

18- Sound Level dBA: Max. Sound Level shall not exceed 90 db.

19- Corrosion Content (H2S, Salty Water,...): -

20- Type (Diaphragm, Piston,...): Diaphragm

21- Valve on Air Failure Action (Open, Close, Lock): OPEN

22- Signal to Positioner (3-15 psi,4-20 mA): 4-20 mA

23- Max Available Air Supply (PSIG): 80

24- Positioner+I/P(Electropenumatic): Yes

25- Hand Wheel: Yes

26- Air Regulator and Filter: Yes

27- Gas Flow Rate (Min, Norm, Max): 2/5/15

28- Inlet Pressure (PSIG): 580/580/580

29- Outlet Pressure (PSIG): 560/560/560 

30- Operating Temperature: 50-140 F

31- Critical Pressure: 660

32- Red. Temp.: -75 F

33- Specific Gravity (SG): 0.875

34- H2S: Yes

- CV Calculation to be Done by Vendore.

- All Wetted Part Materials should be according to NACE Standard MR-01-75.

- Electropenumatic positioner to be supplied with each valve to recieve 4-20mA.

- Valve to be supplied with bottom Flang.

- Max DP shut off according to the ANSI Class of line Pipe.

  
نویسنده : مهندس شهامتی ; ساعت ۱٢:٢٥ ‎ب.ظ روز سه‌شنبه ۱٢ بهمن ۱۳۸٩
تگ ها : data sheet